Metal Deck Blog

Are you a steel fabricator, general contractor, or engineer looking to learn about metal decking? Learn about roof deck, floor deck, Punchlok. Read our metal deck blog.

Blog Feature

Metal Deck | Finishes

By: Paul Rubio
December 26th, 2019

Do you have a metal decking job and do not understand the finish that is specified on the plans? In this article, we will discuss the different finishes and when it’s best to use each of them. The four finishes we will review are:

Blog Feature

How to | Metal Deck

By: Paul Rubio
December 19th, 2019

Most metal roof deck jobs are galvanized. Since you normally install a built up roof on top of the metal deck the color of the finish is irrelevant. Once in awhile though you have an uncommon condition in which you need a structural product that has an architectural finish. Your job requires a panel that has a galvanized substrate, can span a long distance, has structural engineering, and requires a nice looking paint finish. It would seem like such a product would exist, but it does not.

Blog Feature

Metal Deck | PunchLok II

By: Paul Rubio
December 12th, 2019

How would you like to save a ton of time and money on your next metal roof deck project? Punchlok II has the ability to eliminate top seam welds and allows for the use of a lighter gauge steel in many instances. However, it is not right for all applications. In this guide we will explain the Punchlok II system and the VSC2 side lap connection. We will specifically talk about whether it is correct for a roof deck or a floor deck application.

Blog Feature

Metal Deck | PunchLok II | Button Punch

By: Paul Rubio
December 6th, 2019

An installation cannot be done correctly without the right tools. When it comes to metal decking, two of the tools most often used are either a Button Punch or a Punchlok II/VSC2 for side lap connection.

Blog Feature

Metal Deck | PunchLok II

By: Paul Rubio
November 21st, 2019

Do you have a small job, under 10,000 sq. ft., in which PLB-36, PLN-24, PLN-3, or 1.5PLB Punchlok II metal decking has been specified in the plans? Maybe you are trying to find out where to buy the metal decking or find a PunchLok II tool?

Blog Feature

Metal Deck

By: Kathy Midence
October 25th, 2019

The cost of metal decking varies. There are several factors that impact the cost of metal deck, such as the cost of steel, the thickness of the steel, type and finish. What this means is we aren’t able to put up a list of our pricing, since those factors cause the price to vary. The aim of this article is to go through some of these factors to help aid you in preparing your budget. You will be able to obtain a clearer understanding of which factors make the decking cost more and which cause it to cost less. Below we will go over 5 of the top factors that affect the cost.

Blog Feature

Metal Deck

By: Robert Rubio
October 24th, 2019

Metal Decking is manufactured in a few different forms. The two most commonly used are Composite Metal Floor Deck and Non-Composite Metal Roof Deck. It is important to know the difference when you go to purchase, so that you order the correct type.