Metal Decking
Back to Main

Blog

Metal Deck Blog

Are you a steel fabricator, general contractor, or engineer looking to learn about metal decking? Learn about roof deck, floor deck, Punchlok. Read our metal deck blog.

Blog Feature

Metal Deck | Cutting

By: Paul Rubio
March 6th, 2020

So you’re a steel fabricator and you have been awarded a metal deck job. You’re used to hanging iron, but not installing metal decking. You have looked around the internet and the only thing you can find are articles that talk about cutting deck with a grinder or a skill saw. If you had a couple of sheets that would be fine, but on a project of any substance you need to have the correct equipment. Otherwise, you will bleed money on labor cost. This article will explain which equipment should be used to cut metal decking properly.

Blog Feature

How to | Metal Deck | Cutting

By: Paul Rubio
February 27th, 2020

So you’re a contractor and you’re doing a small metal decking job. You have never installed metal decking and you have no idea how to cut metal decking. Don’t worry we have you covered. Our goal is to teach you the basics and walk you through the important safety precautions that you may have otherwise overlooked. We even made a video that shows you a step by step guide to cutting metal decking.