Blog

Metal roof decking has been around for decades. If you’re looking for it, you will find it on older buildings as well as newer construction. However, the metal decking you will find on older buildings is unlikely to match the metal decking profiles on the market today.

If you purchase metal decking then you have likely heard of Verco Decking or Vulcraft, or possibly even both. Did you know they are both divisions of Nucor? Whichever decking manufacturer you are more familiar with will largely depend on where you are located within the United States. This is because Verco Decking and Vulcraft are split into different territories. Meaning, if you need Vulcraft decking but your job is located in Verco territory, you will need to get Verco decking accepted as a substitute. Vulcraft will not sell decking in Verco territory and vice versa.

Have you ever looked at the metal decking specifications on a job and seen the words or equal and wondered equal to what? You will typically find these words listed right after the type of panel and the metal decking manufacturer.

Working in the construction industry you learn pretty early on that once a job gets started, they tend to move quickly. So, when you are told you need to purchase material to keep the job going, you jump on it and try to get it to the jobsite as quickly as possible. The sooner you can get the material to your jobsite the better.

Have you ever been on a job and tried to attach two items, but for one reason or another you couldn’t get it to work. Maybe you were using the wrong fastener or the wrong type of tool. Whichever the case, you learned that there are proper fasteners and tools for attaching different types of materials.

If you have ever installed metal decking then you know it is not easy work. Some aspects that make the job difficult are unavoidable, such as the weight of the metal decking itself. It makes it hard to carry and set in place long and heavy sheets.

When you install metal decking you are likely to come across a few different methods to attach the sidelaps. In the past, there were three main methods: button punch, stitch screwing, and seam welding. There are reasons you’d want to use each method, but when it came to a seam weld the main reason was the superior overall strength values it offered.

Do you have a project that is specifying metal deck and you know that it is going to have concrete poured over it?

Installing metal deck is not a simple process. From landing the deck in place, spreading it, temporarily and permanently fastening it, to attaching the side laps, the installation of metal deck is hard work.

Metal deck isn’t your everyday building product. You won’t find it at your local Home Depot or Lowes. So where can you purchase metal decking from? And who can you purchase from?